● 32-Ch. Motionnet® Digital I/O slave modules
● Max. 20Mbps transfer rate
● Easy installation with RJ45 phone jack and LED diagnostic
● Pluggable terminal block with spring plug connectors
● DIN rail mounting (L-122 x W-66 x H-104 mm)

Categories: ,



32-Ch. Digital input

107-D1xx Series is a 32-Channel Digital I/O Motionnet® slave module. With CAT5 cable, 107-D1xx Series can be connected serially. It also equipped with RJ45 phone jack for easy installation and LED for effortless diagnosis.

Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP / STP Ethernet cable
Surge protection 10 KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750 Vrms
Input types NPN
Input impedance 5.6KΩ / 0.5W
Input current ±5mA (Max.)
Output types NPN open collector darlington transistors
Switch capacity Each output Ch. is 350mA at 24VDC
Response time On to Off, about 50μs ;

Off to On, about 10μs

Over current protection 3A (Max.) for each port (8 Ch.)
Power input 24VDC±10%
Power consumption 4W typical
Working temperature 0 to 60°C


Ordering Information

  • 107-D140-NXT  

    32-Ch. Digital input

  • 107-D122-NNT

    16-Ch. Digital input / 16-Ch. Digital output

  • 107-D104-XNT

    32 Ch. Digital output

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M