raspberry4automation

106-D511-NNT(8-CH.DI/DO)

Features

● 16-Channel Motionnet® Digital I/O slave modules

● Max. 20Mbps transfer rate

● Easy installation with RJ45 phone jack and LED diagnosis

● Pluggable terminal block with spring plug connectors

● DIN rail mounting (L-77 x W-69 x H-41 mm)

Categories: ,

Description

106-D511-NNT

8-Ch. Digital input / 8-Ch. Digital output

106-D5xx Series is a 16-Channel Digital I/O Motionnet® slave module. With CAT5 cable, 106-D5xx Series can be connected serially. It also equipped with RJ45 phone jack for easy installation and LED for effortless diagnosis.

Motionnet®
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP / STP Ethernet cable
Surge protection 10 KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750 Vrms
Input impedance 5.6KΩ / 0.5W
Input current ±5mA (Max.)
Output types NPN open collector darlington transistors
Switch capacity Each output Ch. is 350mA at 24VDC
Response time On to Off, about 50μs ;

Off to On, about 10μs

Over current protection 3A (Max.) for each port (8 Ch.)
 
General
Power input 24VDC±10%
Power consumption 1.5W typical
Working temperature 0 to 60°C

Resources

Ordering Information

  • 106-D520-NXT

    16-Ch. Digital input

  • 106-D511-NNT

    8-Ch. Digital input / 8-Ch. Digital output

  • 106-D502-XNT

    16-Ch. Digital output

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M