raspberry4automation

106-D440-NXT(32-CH.DI)

Features

● 32-Ch. Motionnet® Digital I/O slave modules

● Max. 20Mbps transfer rate

● Easy installation with RJ45 phone jack and LED diagnosis

● DIN rail mounting (L-77 x W-124 x H-41 mm)

● 106-D4xx Series : Screw Terminal Block

Categories: ,

Description

106-D440-NXT

32 channels. digital input

The 106-D4xx series are 32-channel digital I/O Motionnet ®  slave modules. The 106-D4xx series can be connected serially using CAT5 cable. It also features an RJ45 phone jack for easy installation and LEDs for easy diagnostics.

Motionnet® _
serial interface Half-duplex RS-485 with transformer isolation
cable type CAT5 UTP / STP Ethernet cable
surge protection 10 kV
transfer speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750 Vrms
input resistance 5.6KΩ/0.5W
Input Current ±5mA (max)
output type NPN Open Collector Darlington Transistor
Switching capacity each output channel. 350mA at 24VDC
Response time On to Off, about 50μs;

Off to On, about 10µs

Overcurrent Protection 3A (max) per port (8 lanes)
 
general
power input 24VDC±10%
energy consumption 1.5W typical
Operating temperature 0 to 60°C

Resources

Ordering Information

  • 106-D440-NXT

    32-Ch. Digital input 

  • 106-D422-NNT

    16-Ch. Digital input and 16-Ch. Digital output 

  • 106-D404-XNT

    32-Ch. Digital output

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M